How to measure Standards with KLIPPEL?

New:

Detailed guide for IEC Standard 60268-21

Overview

Consumer Technology Association

CEA Standards	Supported by KLIPPEL MEASUREMENT SYSTEM Modules (*optimized for QC application)
CEA-CEB19 Recommended Loudspeaker Safety Practices	DIS, TRF, PWT, LAA, SPL^, SAN^
CEA-803 R200X: Mobile Electronics Wiring Designations for Audio and Vehicle Security	DIS, TRF, SPL^, SAN^
CEA-2006-A Testing & Measurement Methods for Mobile Audio Amplifiers	DIS, TRF, PWT, LAA, SPL^, SAN^
CEA-2010-A (ANSI) Standard Method of Measurement for Powered Subwoofers	TBM, MTON
CEA-2010-B (ANSI) Standard Method of Measurement for Subwoofers	TBM, MTON
CEA-2019 Testing and Measurement Methods for Audio Amplifiers	DIS, TRF, PWT, LAA, SPL^, SAN^
CEA-2031 Testing and Measurement Methods for Mobile Loudspeaker Systems	DIS, TRF, LSI, LAA, SPL^, SAN^, SYN^*
CEA-2034 (ANSI) Standard Method of Measurement for In-Home Loudspeakers	NFS, POL, TBM, SPL^, SAN^
EIA-426-B Loudspeakers, Optimum Amplifier Power

International Electrotechnical Commission

IEC Standards	Supported by KLIPPEL MEASUREMENT SYSTEM Modules (optimized for QC application)*
IEC 60268-1 Sound system equipment - Part 1: General	DIS, TRF, SPL, SAN
IEC 60268-3 Sound system equipment - Part 3: Amplifiers	DIS, TRF, SPL^, SAN
IEC 60268-4 Sound system equipment - Part 4: Microphones	DIS, TRF, SPL, SAN
IEC 60268-5 Sound system equipment - Part 5: Loudspeakers	DIS, TRF, SCN, LSI, LPM, SPM, PWT, SIM, LSIM, NFS, PPP, SPL, SPL-IMP, IMP, SAN, TSX*
IEC 60268-7 Sound system equipment - Part 7: Headphones and earphones	DIS, TRF, SCN, LSI, LPM, SPM, PWT, SIM, LSIM, NFS, SPL, SAN, EQA, PP
IEC 60268-13 Sound system equipment - Part 13: Listening tests on loudspeakers	SIM-AUR, DIF-AUR,
IEC 60268-16 Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index	TRF, SPL, SAN
IEC 60268-21 Sound system equipment - Part 21: Acoustical (output-based) measurements	Detailed guide for IEC Standard 60268-21
IEC 60268-22 Future Standard Dedicated to Electrical and Mechanical Measurements	DIS, TRF, SCN, LSI, LPM, SPM, PWT, SIM, HMA, LAA, SPL, SPL-IMP, IMP, SAN, DCX, TSX
IEC 60318 Electroacoustics - Simulators of human head and ear	Artificial Ears and Mouths - Simulators
IEC 60488-1 Higher performance protocol for the standard digital interface for programmable instrumentation – Part 1: General	EXD*
IEC 60488-2 Standard digital interface for programmable instrumentation - Part 2: Codes, formats, protocols and common commands	EXD*
IEC 60711 Replaced by IEC 60318	Artificial Ears and Mouths - Simulators
IEC 60959 Replaced by IEC 60318	Artificial Ears and Mouths - Simulators
IEC 61094-5 Electroacoustics - Measurement microphones - Part 5: Methods for pressure calibration of working standard microphones by comparison	DIS, TRF, PPP, SPL^, SAN^, PP^*
IEC 61305-5 Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance - Part 5: Loudspeaker	DIS, TRF, SIM-AUR, DIF-AUR, SPL^, SAN^
IEC 61842 Microphones and earphones for speech communications	DIS, TRF, SPL^, SAN
IEC 62458 Sound system equipment - Electroacoustic transducers - Measurement of large signal parameters	LPM, LSI, PWT, SPM, SIM-AUR, DIS-AUR, SIM, LSIM, BFS, MSC, BAC
IEC 62459 Sound system equipment - Electroacoustic transducers - Measurement of Suspension Parts	SPM, LSI, LPM, MSPM, LST, IMP, TSX*
IEC 62777 Quality evaluation method for the sound field of directional loudspeaker array system	NFS, POL
IEC WD 63034 Microspeakers	DIS, TRF, SCN, LSI, LPM, SPM, PWT, SIM, LSIM, NFS, PPP, MMT, LAA, SPL, SPL-IMP, IMP, SAN, DCX, TSX

European Standards

European Standards	Supported by KLIPPEL MEASUREMENT SYSTEM Modules (*optimized for QC application)
BS EN 54-24 Fire detection and fire alarm systems - components of voice alarm systems: Loudspeakers	DIS, TRF, SCN, LSI, LPM, SPM, PWT, SIM, LSIM, SPL, SAN, PP*
BS EN 50332 Sound system equipment - Headphones and earphones associated with personal music players	DIS, TRF, SIM, LSIM, LAA, SPL, SAN

Audio Engineering Society

AES Standards	Supported by KLIPPEL MEASURMENT SYSTEM Modules (*optimized for QC application)
AES2 Standards for acoustics - Methods of measuring and specifying the performance of loudspeakers for professional application - Drive units	DIS, TRF, SCN, LSI, LPM, SPM, PWT, SIM, LSIM, MTON, SPL, IMP, SPL-IMP, SAN, TSX*
AES17 Standard method for digital audio engineering - Measurement of digital audio equipment	SPL, SAN
AES56 Standard on acoustics – Sound source modeling - Loudspeaker polar radiation measurement	DIS, TRF, SCN, SIM, LSIM, NFS, SPL, SAN
AES X223 Loudspeaker driver comparison chambers	TRF, SPL, EQA
AES X241 End of line testing for production loudspeaker drivers	SPL, IMP, SPL-IMP, SAN, MSC, TSX

Institute of Electrical and Electronics Engineers

IEEE Standards	Supported by KLIPPEL MEASUREMENT Modules (optimized for QC application)*
IEEE 269 Standard methods for measuring transmission performance of analog and digital telephone sets, handsets and headsets	DIS, TRF, SCN, LSI, LPM, SPL, SAN, DTMF*
IEEE 488 Standard digital interface for programmable instrumentation	EXD*
IEEE 1206 Standard methods for measuring transmission performance of telephone handsets and headsets	DIS, TRF, SCN, LSI, LPM, SPL, SAN
IEEE 1329 Standard method for measuring transmission performance of speakerphones	DIS, TRF, SCN, LSI, LPM, SPL, SAN
IEEE 1652 Standard for the application of free field acoustic reference to telephony measurements	DIS, TRF, SCN, LSI, LPM, SPL, SAN

American National Standards Institute

ANSI Standards	Supported by KLIPPEL MEASUREMENT Modules (*optimized for QC application)
ANSI S1.15-Part 1 Measurement microphones - Part 1: Specifications for laboratory standard microphones	DIS, TRF, SPL, SAN
ANSI S1.15-Part 2 Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique	DIS, TRF, SPL, SAN
ANSI S3.7 Method for coupler calibration of earphones	DIS, TRF, SPL, SAN
ANSI S3.22 Specification of hearing aid characteristics	DIS, TRF, SPL, SAN
ANSI S3.25 Standard for an occluded ear simulator	DIS, TRF, SPL, SAN
ANSI S12.42 Microphone-in-real-ear and acoustic test fixture methods for the measurement of insertion loss of circumaural hearing protection devices	DIS, TRF, SPL, SAN

American Society for Testing and Materials

ASTM International Standards	Supported by KLIPPEL MEASUREMENT Modules (*optimized for QC application)
ASTM E111-04 Standard test method for young's modulus, tangent modulus and chord modulus	MPM
ASTM E756 Standard test method for measuring vibration-damping properties of materials	MPM
ASTM F2504-05 Standard practice for describing system output of implantable middle ear hearing devices	DIS, TRF, SPL, SAN

International Telecommunication Union

ITU Standard	Supported by KLIPPEL MEASUREMENT Modules (*optimized for QC application)
ITU-R Recommendation 51 Artificial mouth	Artificial ear mouths simulators
ITU-R Recommendation 57 Artificial ears	Artificial ear mouths simulators
ITU-R Recommendation BS.775-2 Multichannel stereophonic sound system with and without accompanying picture	DIS, TRF, SPL, SAN
ITU-R Recommendation BS.1116 Method for subjective assessment of small impairments in audio systems including multichannel sound systems	DIS, TRF, SIM-AUR, DIF-AUR, SPL, SAN
ITU-R Recommendation BS. 1534-1 Method for subjective assessment of intermediate level coding systems	DIS, TRF, SIM-AUR, DIF-AUR, SPL, SAN
ITU-T Recommendation P.79 Telephone transmission quality, measurements related to speech loudness	DIS, TRF, SPL, SAN
ITU-T P.581 Use of head and torso simulator for hands-free and handset terminal testing	Artificial ear mouths simulators

International Organization for Standardization

ISO Standard	Supported by KLIPPEL MEASUREMENT Modules (*optimized for QC application)
ISO 266 Acoustics - Preferred frequencies	SPL, SPL-IMP, SAN*
ISO 4869-3 Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture	TRF, PPP, SPL, SAN, PP*

Telecommunications Industry Association

TIA Standard	Supported by KLIPPEL MEASUREMENT Modules (*optimized for QC application)
TIA-470 Telecommunications telephone terminal equipment - Network signaling performance requirements for analog telephones	DIS, TRF, SPL, SAN
TIA-810 Telecommunications telephone terminal equipment - Transmission requirements for narrowband digital telephones	DIS, TRF, SPL, SAN
TIA-920 Telecommunications telephone terminal equipment - Transmission requirements for wideband digital wireline telephones	DIS, TRF, SPL, SAN

European Telecommunications Standards Institute

ETSI Standard	Supported by KLIPPEL MEASUREMENT Modules (*optimized for QC application)
ETSI ES 201 235 Specification of Dual-Tone Multi-Frequency (DTMF) Transmitters and Receivers	DTMF*