Home / 专业知识 / 文献 / 标准

标准


CEA标准

KLIPPEL支持的测量模组
(*针对QC应用的优化)

CEA-CEB19
Recommended Loudspeaker Safety Practices(推荐的扬声器安全规范)
DIS, TRF, PWT, LAA, SPL*, SAN*
CEA-803 R200X: 
Mobile Electronics Wiring Designations for Audio and Vehicle Security(用于音频和车辆安全的移动电子线路名称)
DIS, TRF, SPL*, SAN*
CEA-2006-A
Testing & Measurement Methods for Mobile Audio Amplifiers(移动音频放大器的测试和测量方法)
DIS, TRF, PWT, LAA, SPL*, SAN*
CEA-2010-A (ANSI)
Standard Method of Measurement for Powered Subwoofers(电动超低音扬声器测量的标准方法)

TBM, MTON

CEA-2010-B (ANSI)
Standard Method of Measurement for Subwoofers(测量低音扬声器的标准方法)
TBM, MTON

CEA-2019
Testing and Measurement Methods for Audio Amplifiers(音频放大器的测试和测量方法)

DIS, TRF, PWT, LAA, SPL*, SAN*

CEA-2031
Testing and Measurement Methods for Mobile Loudspeaker Systems(移动扬声器系统的测试和测量方法)

DIS, TRF, LSI, LAA, SPL*, SAN*, SYN*

CEA-2034 (ANSI)
Standard Method of Measurement for In-Home Loudspeakers(家用扬声器测量的标准方法)

NFS, POL, TBM, SPL*, SAN*



欧洲标准

KLIPPEL支持的测量模组
(*optimized for QC application)

BS EN 54-24 
Fire detection and fire alarm systems - components of voice alarm systems: Loudspeakers(火灾探测和火灾报警系统 - 语音报警系统的组件:扬声器)

DIS, TRF, SCN, LSI, LPM, SPM, PWT, SIM, LSIM, SPL*, SAN*, PP*

BS EN 50332
Sound system equipment - Headphones and earphones associated with personal music players(音响系统设备 - 便携式音频播放设备用头戴式受话器和耳机)
DIS, TRF, SIM, LSIM, LAA, SPL*, SAN*

AES标准

KLIPPEL支持的测量模组
(*针对QC应用的优化)

AES2
Standards for acoustics - Methods of measuring and specifying the performance of loudspeakers for professional application - Drive units(声学标准 - 专业应用中扬声器性能的测量和规定方法 - 驱动单元)
DIS, TRF, SCN, LSI, LPM, SPM, PWT, SIM, LSIM, SPL*, IMP*, SPL-IMP*, SAN*
AES17
Standard method for digital audio engineering - Measurement of digital audio equipment(数字音频工程的标准方法 - 数字音频设备的测量)
SPL*, SAN*

AES56
Standard on acoustics – Sound source modeling - Loudspeaker polar radiation measurement(声学标准 - 声源建模 - 扬声器极平面辐射测量)

DIS, TRF, SCN, SIM, LSIM, NFS, SPL*, SAN*

AES X223
Loudspeaker driver comparison chambers(扬声器驱动单元比较腔室)
TRF, SPL*, EQA*
AES X241
End of line testing for production loudspeaker drivers(生产扬声器驱动单元的产线终端测试)
SPL*, IMP*, SPL-IMP*, SAN*, MSC*

IEEE标准

KLIPPEL支持的测量模组
(*针对QC应用的优化)

IEEE 269 
Standard methods for measuring transmission performance of analog and digital telephone sets, handsets and headsets(测量模拟和数字电话机、听筒和耳机的传输性能的标准方法)

DIS, TRF, SCN, LSI, LPM, SPL*, SAN*, DTMF*

IEEE 488
Standard digital interface for programmable instrumentation(用于可编程仪器的标准数字接口)
EXD*
IEEE 1206
Standard methods for measuring transmission performance of telephone handsets and headsets(测量电话听筒和耳机的传输性能的标准方法)
DIS, TRF, SCN, LSI, LPM, SPL*, SAN*

IEEE 1329 
Standard method for measuring transmission performance of speakerphones(测量免提电话传输性能的标准方法)

DIS, TRF, SCN, LSI, LPM, SPL*, SAN*

IEEE 1652 
Standard for the application of free field acoustic reference to telephony measurements(自由场声学基准应用到电话测量的标准)

DIS, TRF, SCN, LSI, LPM, SPL*, SAN*


ANSI标准

KLIPPEL支持的测量模组
(*针对QC应用的优化)

ANSI S1.15-Part 1
Measurement microphones - Part 1: Specifications for laboratory standard microphones(测量微型扬声器 - 第一部分:实验室标准麦克风的规格)

DIS, TRF, SPL*, SAN*

ANSI S1.15-Part 2 
Measurement microphones - Part 2: Primary method for pressure calibration of laboratory standard microphones by the reciprocity technique(测量微型扬声器 - 第二部分:采用互易技术对实验室标准麦克风进行声压校准的原级方法)

DIS, TRF, SPL*, SAN*

ANSI S3.7 
Method for coupler calibration of earphones(耳机耦合器校准的方法)
DIS, TRF, SPL*, SAN*
ANSI S3.22
Specification of hearing aid characteristics(助听器的特性规范)
DIS, TRF, SPL*, SAN*
ANSI S3.25 
Standard for an occluded ear simulator(封闭式耳模拟器的标准)
DIS, TRF, SPL*, SAN*

ANSI S12.42
Microphone-in-real-ear and acoustic test fixture methods for the measurement of insertion loss of circumaural hearing protection devices(用于测量耳罩式听力保护装置的插入损耗的耳内麦克风和声学测试夹具方法)

DIS, TRF, SPL*, SAN*


ASTM国际标准

KLIPPEL支持的测量模组
(*针对QC应用的优化)

ASTM E111-04 
Standard test method for young's modulus, tangent modulus and chord modulus(杨氏模量、正切模量和弦向模量的标准测试方法)
MPM
ASTM E756 
Standard test method for measuring vibration-damping properties of materials(测量材料减振特性的标准测试方法)
MPM

ASTM F2504-05 
Standard practice for describing system output of implantable middle ear hearing devices(描述植入式中耳助听器系统输出的标准规范)

DIS, TRF, SPL*, SAN*


ITU标准

KLIPPEL支持的测量模组
(*针对QC应用的优化)

ITU-R Recommendation 51(ITU-R建议 51)
Artificial mouth(人工嘴)
Artificial ear mouths simulators(人工耳嘴模拟器)
ITU-R Recommendation 57(ITU-R建议 57)
Artificial ears(人工耳)
Artificial ear mouths simulators(人工耳嘴模拟器)
ITU-R Recommendation BS.775-2(ITU-R建议 BS.775-2)
Multichannel stereophonic sound system with and without accompanying picture(有无图像的多声道立体声系统)
DIS, TRF, SPL*, SAN*

ITU-R Recommendation BS.1116(ITU-R建议 BS.1116)
Method for subjective assessment of small impairments in audio systems including multichannel sound systems(主观评估包括多声道声音系统的音频系统中的小损伤的方法)

DIS, TRF, SIM-AUR, DIF-AUR, SPL*, SAN*

ITU-R Recommendation BS. 1534-1(ITU-R建议 BS. 1534-1)
Method for subjective assessment of intermediate level coding systems(中级编码系统的主观评价方法)

DIS, TRFSIM-AUR, DIF-AUR, SPL*, SAN*

ITU-T Recommendation P.79(ITU-T建议 P.79)
Telephone transmission quality, measurements related to speech loudness(电话传输质量,与语音响度相关的测量)

DIS, TRF, SPL*, SAN*
ITU-T P.581
Use of head and torso simulator for hands-free and handset terminal testing(使用头部和躯干模拟器进行免提和耳麦终端测试)
Artificial ear mouths simulators(人工耳嘴模拟器)

ISO标准

KLIPPEL支持的测量模组
(*针对QC应用的优化)

ISO 266
Acoustics - Preferred frequencies(声学 - 首选频率)
SPL*, SPL-IMP*, SAN*
ISO 4869-3
Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture(声学 - 听力保护器 - 第三部分:使用声学测试夹具测量耳罩式保护器的插入损耗)
TRF, PPP, SPL*, SAN*, PP*

TIA标准

KLIPPEL支持的测量模组
(*针对QC应用的优化)

TIA-470
Telecommunications telephone terminal equipment - Network signaling performance requirements for analog telephones(电信电话终端设备 - 模拟电话的网络信令性能要求)
DIS, TRF, SPL*, SAN*
TIA-810
Telecommunications telephone terminal equipment - Transmission requirements for narrowband digital telephones(电信电话终端设备 - 窄带数字电话的传输要求)
DIS, TRF, SPL*, SAN*
TIA-920
Telecommunications telephone terminal equipment - Transmission requirements for wideband digital wireline telephones(电信电话终端设备 - 宽带数字有线电话的传输要求)
DIS, TRF, SPL*, SAN*

ETSI标准

KLIPPEL支持测量模组
(*针对QC应用的优化)

ETSI ES 201 235
Specification of Dual-Tone Multi-Frequency (DTMF) Transmitters and Receivers(双音多频(DTMF)发射器和接收器的规范)
DTMF*